Description

The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high-viscosity, materials with superior results. Materials: Polyurethane, Plural Component Protective Coatings, Epoxy Coatings, High Solids Coatings, 100% Solids Coatings, Urethanes, Polyurethane Coatings.

Benefits

  • Six fixed mix ratios are available: 1:1, 1.5:1. 2:1, 2.5:1, 3:1 and 4:1.
  • With the Graco XP70, you eliminate waste and save money because you only mix as much material as you need.
  • Reduced cleaning time means you save labour costs and increase uptime.
  • Operators are up and running in just minutes, with a minimum amount of training time. The Graco XP70 runs right out of the box with nothing to set up.
  • Engineered to proportion with two pumps instead of three, the Graco XP70 cuts preventive maintenance by at least one-third.

Markets

  • Building & Construction, Steel Contruction
  • Transportation, Marine
  • Transportation, Railway
  • Energy, Wind
  • Energy, Waste Water Treatment
  • Energy, Oil & Gas
  • Building & Construction, Protective Coating

Materials

  • Polyurethane
  • Plural Component Protective Coatings
  • Epoxy Coatings
  • High Solids Coatings
  • 100% Solids Coatings
  • Urethanes
  • Polyurethane Coatings
Fluid Specifications
Fluid Working Temperature, Max. 71 °C
Fluid Working Temperature, Min. 4 °C
Fluid Viscosity 200-20,000 cps
Fluid Inlet Size 1/4 in NPT(m)
Material Wetted Parts Stainless Steel, Carbon Steel, Carbide, Zinced, Ultra High Molecular Weight Polyethylene (UHMWPE), Polytetrafluoroethylene (PTFE),
Polyamide (PA), Nickel,
Pump Ratio 70:1
Tip Size, Max., Two Guns 0.023 inch
Air Specifications
Air Working Pressure, Max. 12 bar
Air Inlet Size 3/4 in NPT(f)
Power Specifications
Sound Pressure Level 86 dB(A)
Sound Power Level 98 dB(A)