Description
Cost effective Nitrogen generating systems
The PillarGEN Nitrogen generation system has been specifically designed to meet the Nitrogen supply requirements of the current range of Pillarhouse selective soldering systems.
The latest Nitrogen generation design technology combines compact size with ultra-quiet operation.
Description
The PillarGEN 30 is specifically designed to integrate with the Pillarhouse Pilot bench top soldering system.
The PillarGEN 40 and 80 systems offer a fully integrated communication protocol to allow the monitoring and displaying of the unit’s status on the selective soldering machine. These values include oxygen concentration, flow rates and pressure – incoming air/outgoing Nitrogen.
Specifications
PillarGEN-30
- Height: 835mm / 33”
- Width: 915mm / 36“
- Depth: 700mm / 28”
- Air requirement: 400 litres/min., 8-10 bar / 116-145 psi, 12mm input supply
- Power supplies: Single phase + PE
- Voltage: 100V – 240V
- Output: 30 litres Nitrogen/min. @ 100 ppm average 99.990%
- Operating noise level: 70 dB or less
PillarGEN-40
- Height: 1155mm / 46”
- Width: 968mm / 38“
- Depth: 700mm / 28”
- Air requirement: 500 litres/min., 8-10 bar / 116-145 psi, 12mm input supply
- Power supplies: Single phase + PE
- Voltage: 100V – 240V
- Output: 40 litres Nitrogen/min. @ 50 ppm average 99.995%
- Operating noise level: 70 dB or less
PillarGEN-80
- Height: 1155mm / 46”
- Width: 1020mm / 40“
- Depth: 970mm / 38”
- Air requirement: 1000 litres/min., 8-10 bar / 116-145 psi, 12mm input supply
- Power supplies: Single phase + PE
- Voltage: 100V – 240V
- Output: 80 litres Nitrogen/min. @ 50 ppm average 99.995%
- Operating noise level: 70 dB or less
