Graco Reactor A-25

Air-Driven Foam Proportioner – The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you’re spraying at maximum flow rates – resulting in better quality foam. \n \nAir-Driven Foam Proportioner – The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you’re spraying at maximum flow rates – resulting in better quality foam. \n

\n
• Maintains temperature setpoints for better yield
\n
• Maintains consistent output pressure for uniform spray pattern
\n
• Easy to operate and maintain
\n
• Best choice for affordability and durability
\n

\nMaterial: \n

\n
• Spray Polyurethane Foam
\n

\n

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Graco Reactor A-25
Maximum Fluid Working Pressure	1920 psi
Maximum Input Pressure to Motor	120 psi air
Pressure Ratio Air	16:1
Air Inlet	1/2 npsm(f)
Recommended Air Supply Hose Size	1/2 in ID minimum
Air Consumption	40 scfm /120 psi, 1.6 gpm
Recommended Hydraulic Supply Hose Size	3/4 in ID minimum
Recommended Hydraulic Return Hose Size	1 in ID minimum
Fluid Inlets	3/4 npt(f)
Fluid Circulation Ports	1/4 npsm(m), with plastic tubing/250 psi maximum
Maximum Fluid Temperature	190° F
Maximum Output (10 weight oil at ambient temperature)	25 lb/min at 75 cycles/min
Output per cycle (A and B)	0.031 gal
Heated Power (A and B Heaters, no hose)	10200 Watts
Sound Power, per ISO 9614–2	94.7 dB(A) at 1000 psi, 3.0 gpm, 15 cpm
Sound Pressure, 1 m from equipment	81 dB(A) at 1000 psi, 3.0 gpm, 15 cpm
Wetted Parts	Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Line Voltage Requirement
230V 1 phase and 230V 3 phase units	195-264 Vac, 50/60 Hz
380V 3 phase units	338-457 Vac, 50/60 Hz>
Fluid Outlets
Component A (ISO)	#8 JIC (3/4-16 unf), with #5 JIC adapter
Component B (RES)	#10 JIC (7/8-14 unf), with #6 JIC adapter