Loctite 222 Threadlocker 50ml

LOCTITE® 222 is designed for the locking and sealing of threaded fasteners which require easy disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Particularly suitable for applications such as adjustment of set screws, small diameter or long engagement length fasteners, where easy disassembly is required without shearing the screw. The thixotropic nature of LOCTITE® 222 reduces the migration of liquid product after application to the substrate. \n \nLoctite ® 222™ Threadlocker is ideal for fastener diameters of 1/4″(6mm) and smaller. Controlled lubricity for accurate clamp loads. Parts can be separated using hand tools. Apply to threaded parts before assembly. Controlled lubricity for accurate clamp loads. Parts can be disassembled with hand tools. Approved for use in or around food processing areas. \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Applications	Adhesives > Threadlocking > Wicking Adhesives > Threadlocking > Low Strength Thread Sealing and Threadlocking > Threadlocking > For Metal Parts
Chemistry	(Meth-)Acrylates (monomeric)
Media Carrier	100 % liquid & paste
Cure Type	Anaerobic
Components	One component – requires no mixing
Viscosity	Low, thixotropic
RoHS Compliant	yes

\n

Typical properties of uncured material

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Specific Gravity @ 25 °C	1.05
Flash Point	See MSDS
Viscosity, Brookfield – RVT, 25 °C, mPa·s (cP):
Spindle 3, speed 2.5 rpm	≥3,500
Spindle 3, speed 20 rpm	900 to 1,500LMS
Viscosity, EN 12092 – MV, 25 °C, after 180 s, mPa·s (cP):
Shear rate 277 s-1	135